Care Advice

A table with a linoleum surface has natural sound absorption and a warm feeling, but it requires some maintenance to maintain its positive qualities.

Because linoleum is sensitive to moisture, it is important to wipe up spills as soon as possible to avoid lingering stains. Wipe with a damp cloth and a pH-neutral cleaning agent. Wipe away any remaining water with a dry cloth. Linoleum is self-healing over time for very small scratches, but still be careful with sharp objects as larger scratches will not disappear over time. Do not use alkaline or alcohol-based cleaning agents as they will damage the surface. To avoid stains, you can use coasters under glasses and flower pots. 

Hard wax oil provides the wood with good protection and a soft feeling. 

In daily care, simply wipe the table with a lightly damp cloth, always wipe dry afterwards. For tougher stains, mix 1/10 soap with water. Remember to dab away stains, avoid rubbing as it can easily cause shiny spots.

To maintain the protective surface over time, we recommend applying a new layer of wax once a year or as needed. We recommend the hard wax 3062 from OSMO.

A lacquered surface seals the veneer and provides protection that extends its lifespan, but it is still important to wipe up spills immediately to avoid stains. Wipe the table with a damp cloth, if needed, you can add 1/10 dishwashing liquid or soap to the water when wiping the table. Always wipe dry to avoid stains due to residual water. 

If you leave objects, such as tablecloths and vases, on the table for an extended period, it can cause discoloration of the wood. Therefore, do not leave objects in the same place for a long period, especially during the first months after the table is manufactured.

Make it a habit to wipe the table surface with lukewarm water. For stains, you can also use a mild dishwashing liquid. If the stain has dried, you can scrub gently with a dish brush. High-pressure laminate is a durable surface and is preferred in environments where tougher cleaning, such as disinfectants, is required. 

The floor that ended up on the table, Artigo kayar is a rubber floor containing coconut fiber. 

Wipe the table with a damp cloth. Wipe away stains as soon as possible to avoid the stain migrating into the rubber and leaving permanent marks. Use neutral or slightly alkaline cleaning agents and make sure to always rinse thoroughly with water afterwards. Use products with a pH of 7-8. The cleaning agents used must be approved for rubber flooring. 

Furniture made of wood, both solid wood and veneer, are affected by humidity and temperature fluctuations. Dry air dries out the wood, causing it to shrink. High humidity, on the other hand, causes the wood to expand. Therefore, avoid exposing the furniture to rapid changes in temperature to reduce the risk of the wood/veneer warping or cracking. 

After a while, you may need to check the screws in the table's frames and tighten them with a screwdriver if necessary. 

To increase the lifespan of the chair and reduce wear on the floor, we attach furniture glides to the chairs. As they wear out over time, they will need to be replaced. 

If the chair is placed on a wooden floor, tiles, or linoleum, we use felt glides.
If the chair is placed on a carpet, we use hard plastic glides. 

If the fabric is not part of our standard collection, we recommend always finding out which company has manufactured the fabric and following their care instructions for that specific fabric.

Upholstered Chair
The fabric can be wiped with a damp cloth for minor stains.
The seat cushions can be unscrewed for fabric replacement.
The upholstered backrests, however, cannot be removed for fabric replacement.

Seat Cushion for Bench
The seat cushions can be unscrewed for fabric replacement.

Armchair
The cover of the seat cushion can be removed for washing.
The back cushion does not have a cover but can be unscrewed for fabric replacement.

The fabrics in our standard collection are manufactured by Ludvig Svensson and Nevotex and have the following care instructions.
Applies to seat cushion for Leo armchair

Ludvig Svensson

Ally
Material: 85% wool, 15% polyamide.
Care instructions: do not machine wash, iron at low temperature, dry cleaning approved with Perchloroethylene (PCE), do not bleach, do not tumble dry. 

Balance
Material: 82% wool, 12% Ramie, 6% Polyamide.
Care instructions: do not machine wash, iron at low temperature, dry cleaning approved with Perchloroethylene (PCE), do not bleach, do not tumble dry. 

Debut
Material: 78% wool, 12% Ramie, 10 % Viscose, 25% recycled material.
Care instructions: do not machine wash, iron at low temperature, dry cleaning approved with Perchloroethylene (PCE), do not bleach, do not tumble dry. 

Tone
Material: 100% Trevira CS.
Care instructions: wash at 60˚, iron at low temperature, dry cleaning approved with Perchloroethylene (PCE), do not bleach, do not tumble dry. 

Nevotex

Illusion full grain
Material: Surface 100% PU, lining 100% cotton.
Care instructions: wipe away stains immediately with a damp cloth, if needed, this artificial leather can be wiped with a 75% alcohol solution (ethanol).

For more detailed advice, please refer to Ludvig Svensson and Nevotex